warn: Max ticks has already been set prior to setting it through the run call. In these cases the max ticks set through the `run` function is used
warn: No dot file generated. Please install pydot to generate the dot file and pdf.
src/mem/dram_interface.cc:690: warn: DRAM device capacity (16384 Mbytes) does not match the address range assigned (1024 Mbytes)
src/sim/kernel_workload.cc:46: info: kernel located at: gem5/arm64-linux-kernel-6.8.12
src/base/loader/symtab.cc:95: warn: Cannot insert a new symbol table due to name collisions. Adding prefix to each symbol's name can resolve this issue.
src/base/statistics.hh:279: warn: One of the stats is a legacy stat. Legacy stat is a stat that does not belong to any statistics::Group. Legacy stat is deprecated.
board.vncserver: Listening for connections on port 5900
board.terminal: Listening for connections on port 3456
board.realview.uart1.device: Listening for connections on port 3457
board.realview.uart2.device: Listening for connections on port 3458
board.realview.uart3.device: Listening for connections on port 3459
board.remote_gdb: Listening for connections on port 7000
src/arch/arm/fs_workload.cc:121: info: Using bootloader at address 0x10
src/arch/arm/fs_workload.cc:139: info: Using kernel entry physical address at 0x80000000
src/arch/arm/linux/fs_workload.cc:111: info: Loading DTB file: FS_mode/device.dtb at address 0x88000000
src/dev/arm/energy_ctrl.cc:252: warn: Existing EnergyCtrl, but no enabled DVFSHandler found.
src/dev/arm/gic_v3_distributor.cc:884: warn: Gicv3Distributor::write(): setting ARE_NS to 0 is not supported!
src/dev/arm/gic_v3_distributor.cc:889: warn: Gicv3Distributor::write(): setting ARE_S to 0 is not supported!
src/dev/arm/rv_ctrl.cc:176: warn: SCReg: Access to unknown device dcc0:site0:pos0:fn7:dev0
src/arch/arm/insts/pseudo.cc:174: warn: 	instruction 'bti' unimplemented